DIE CUTTING • CREASING EMBOSSING • DEBOSSING FOIL STAMPING

THE FOLLOWING MODELS ARE AVAILABLE   22 x 32 28 x 41 33 x 47 38 x 54 44 x 66 50 x 80 50 x 96

STANDARD EQUIPMENT

Split Frame Steel Platen Infinite Dual Micrometer Impression Adjustment Three-Way Production Control Automatic Oiling System Helical Gears with Thrust Pads Hinged Hard Steel Cutting Plate 3/16" Steel Filler Plate for Conversion from 1.125" to .937" Cutting Rule

Dwell in the Open Position Variable Speed Drive with Speed Readout Frame Drilled for Chaseless Dies Chaseless Die Template with Die Mounting Hardware Wrap-Around Safety Device Platen Stop Bar Automatic Sheet Counter Service Accessory Kit Powered Impression Throw-Off

OPTIONAL EQUIPMENT

Gravity Delivery Wide Openings for Boster Work Conveyor System for Waste Removal Die Loading and Cutting Plate Hoist Load Meter with Digital Display	Only Available on Model 33x47: Hot Foil Stamping Permanently Mounted Full Bed Die Heater with Insulator Honeycomb Base for Die Mounting Automatic Sheet Feeders
(click underlined options for more info!)

Click here for information on the THOMSON AMERICAN Series - Platen Presses

Click here to go to the THOMSON Gravity Delivery Series

Click here to go to the THOMSON NATIONAL PRESS Home Page

Click here to go back to the THOMSON GROUP Home Page

---

thomsongroup@thethomsongroup.com